Install VS Code and Prepare a JavaScript Practice Folder

This part of the JavaScript path moves from knowing that VS Code and Prepare a JavaScript Practice Folder exists to being able to use it deliberately. By the end, you should be able to explain the mechanism, build or configure a small example, verify the result, and diagnose the most common ways it fails.

In this lesson

• Place VS Code and Prepare a JavaScript Practice Folder in the context of the Setup module rather than treating it as an isolated feature.
• Build a mental model for what happens before, during, and after the operation.
• Work through a reproducible example connected to the scenario: build an interactive task dashboard while learning the language and platform APIs.
• Inspect the result and distinguish evidence from assumption.
• Recognize failure modes, misleading shortcuts, and production constraints.
• Leave with a verification checklist and a practical exercise rather than a memorized snippet.

Before touching the installer

For a JavaScript developer, VS Code and Prepare a JavaScript Practice Folder becomes useful when it changes a decision you can verify. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions.

The practical question behind install vs code and prepare a javascript practice folder is not simply whether the feature exists, but what behavior it gives you control over. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism.

Supported paths and practical constraints

Before adding more syntax, make the state of the system observable. That habit matters especially when working with VS Code and Prepare a JavaScript Practice Folder. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. The specific test here is about VS Code and Prepare a JavaScript Practice Folder: change one relevant input, configuration value or boundary and make sure the result still matches the contract described above.

There are usually several ways to accomplish the same visible result. The important skill is knowing which guarantees differ when you choose one form of VS Code and Prepare a JavaScript Practice Folder over another. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work.

Questions to answer about VS Code and Prepare a JavaScript Practice Folder

1. What is the smallest input or state that makes VS Code and Prepare a JavaScript Practice Folder observable?
2. What does success look like, and how can you prove it without relying on a vague UI message?
3. Which configuration, permissions, types, versions or environment details can change the result?
4. Which failure is most likely for a beginner, and what evidence distinguishes it from a different failure?
5. What should remain true after the example is repeated, automated or moved to another environment?

What will be installed and where it lives

In the Setup part of this learning path, VS Code and Prepare a JavaScript Practice Folder is deliberately introduced now because later lessons depend on the boundary it establishes. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. The specific test here is about VS Code and Prepare a JavaScript Practice Folder: change one relevant input, configuration value or boundary and make sure the result still matches the contract described above. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

A production system rarely fails at the exact line shown in a beginner example, so this section connects VS Code and Prepare a JavaScript Practice Folder to the surrounding runtime and operational context. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

Step-by-step setup for VS Code and Prepare a JavaScript Practice Folder

For a JavaScript developer, VS Code and Prepare a JavaScript Practice Folder becomes useful when it changes a decision you can verify. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

The practical question behind install vs code and prepare a javascript practice folder is not simply whether the feature exists, but what behavior it gives you control over. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

Evidence table

What you inspect	What it tells you	What it does not prove
Source/configuration for VS Code and Prepare a JavaScript Practice Folder	What you asked the platform/runtime to do	That the request actually succeeded
Build/validation output	Whether static checks accepted the artifact	That production data and permissions behave correctly
Runtime/result output	What happened for this input	That every edge case is safe
Logs/diagnostics	Where the system spent time or failed	The root cause without interpretation
Repeat test	Whether behavior is reproducible	That the design is optimal

Verification: prove the setup actually works

Before adding more syntax, make the state of the system observable. That habit matters especially when working with VS Code and Prepare a JavaScript Practice Folder. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

There are usually several ways to accomplish the same visible result. The important skill is knowing which guarantees differ when you choose one form of VS Code and Prepare a JavaScript Practice Folder over another. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

Understand the files, processes and settings created

In the Setup part of this learning path, VS Code and Prepare a JavaScript Practice Folder is deliberately introduced now because later lessons depend on the boundary it establishes. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions.

A production system rarely fails at the exact line shown in a beginner example, so this section connects VS Code and Prepare a JavaScript Practice Folder to the surrounding runtime and operational context. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. The specific test here is about VS Code and Prepare a JavaScript Practice Folder: change one relevant input, configuration value or boundary and make sure the result still matches the contract described above.

Configuration choices worth making now

For this part of Install VS Code and Prepare a JavaScript Practice Folder, move beyond the earlier mental model and ask how the behavior survives repetition. Run or reproduce the step twice, change the ordering or boundary case where safe, and verify that the same invariant still holds. A reliable Setup workflow is one that produces evidence you can compare, not one that succeeds only when the exact tutorial sequence is copied.

In Configuration choices worth making now, look at VS Code and Prepare a JavaScript Practice Folder through the constraint that matters in this part of the lesson: make the relevant state visible before you change it, then compare the observed result with the contract you expected. In JavaScript, this prevents a local-looking edit from hiding an environment, data, permission, lifecycle or runtime assumption. Record the evidence from this step because the next decision in the Setup module should be based on what you measured rather than on a repeated rule of thumb.

A first smoke test

Before adding more syntax, make the state of the system observable. That habit matters especially when working with VS Code and Prepare a JavaScript Practice Folder. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

There are usually several ways to accomplish the same visible result. The important skill is knowing which guarantees differ when you choose one form of VS Code and Prepare a JavaScript Practice Folder over another. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism.

Failure-mode matrix

Symptom	Likely category	First evidence to collect
The VS Code and Prepare a JavaScript Practice Folder behavior never occurs	configuration / control flow	verify the relevant code/configuration is actually reached
Build or validation fails	syntax / type / unsupported option	read the first meaningful diagnostic, not the last cascade message
Works locally but not elsewhere	environment / version / permission	compare runtime versions, identity, configuration and data
Result is valid but wrong	assumption / data shape / business rule	inspect intermediate values and boundary conditions
Intermittent behavior	concurrency / timing / external dependency	add timestamps, correlation IDs or deterministic reproduction

Typical setup failures and their real causes

This section needs a different question from the earlier explanation: what would make VS Code and Prepare a JavaScript Practice Folder fail specifically while working through Typical setup failures and their real causes? Choose one realistic boundary, reproduce it deliberately, and inspect the first useful diagnostic or intermediate value. The aim in Install VS Code and Prepare a JavaScript Practice Folder is to recognize the mechanism under changed conditions, not to repeat the same successful path with different wording.

A production system rarely fails at the exact line shown in a beginner example, so this section connects VS Code and Prepare a JavaScript Practice Folder to the surrounding runtime and operational context. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work.

Repair strategy without reinstalling everything

For a JavaScript developer, VS Code and Prepare a JavaScript Practice Folder becomes useful when it changes a decision you can verify. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

The practical question behind install vs code and prepare a javascript practice folder is not simply whether the feature exists, but what behavior it gives you control over. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work. In JavaScript lesson 3 — Install VS Code and Prepare a JavaScript Practice Folder, use that observation as the checkpoint for this exact Setup topic rather than generalizing it beyond the evidence.

Keeping multiple versions/environments under control

This section needs a different question from the earlier explanation: what would make VS Code and Prepare a JavaScript Practice Folder fail specifically while working through Keeping multiple versions/environments under control? Choose one realistic boundary, reproduce it deliberately, and inspect the first useful diagnostic or intermediate value. The aim in Install VS Code and Prepare a JavaScript Practice Folder is to recognize the mechanism under changed conditions, not to repeat the same successful path with different wording.

There are usually several ways to accomplish the same visible result. The important skill is knowing which guarantees differ when you choose one form of VS Code and Prepare a JavaScript Practice Folder over another. The learner should be able to describe the inputs, the operation, and the result in plain language. In the running scenario—build an interactive task dashboard while learning the language and platform APIs—the input might be a value, request, record, event, configuration setting, or user action. The operation is the part controlled by VS Code and Prepare a JavaScript Practice Folder; the result is the state you can inspect afterward. Keeping those three pieces explicit prevents the lesson from collapsing into memorized commands. The specific test here is about VS Code and Prepare a JavaScript Practice Folder: change one relevant input, configuration value or boundary and make sure the result still matches the contract described above.

Security and permissions considerations

In the Setup part of this learning path, VS Code and Prepare a JavaScript Practice Folder is deliberately introduced now because later lessons depend on the boundary it establishes. One useful review technique is to remove or alter a single element and predict what should happen. If the prediction is wrong, the gap is conceptual rather than syntactic. The exercises use that technique because it gives stronger evidence of understanding than simply retyping a finished example. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work.

This section needs a different question from the earlier explanation: what would make VS Code and Prepare a JavaScript Practice Folder fail specifically while working through Security and permissions considerations? Choose one realistic boundary, reproduce it deliberately, and inspect the first useful diagnostic or intermediate value. The aim in Install VS Code and Prepare a JavaScript Practice Folder is to recognize the mechanism under changed conditions, not to repeat the same successful path with different wording.

Upgrade and cleanup strategy

This section needs a different question from the earlier explanation: what would make VS Code and Prepare a JavaScript Practice Folder fail specifically while working through Upgrade and cleanup strategy? Choose one realistic boundary, reproduce it deliberately, and inspect the first useful diagnostic or intermediate value. The aim in Install VS Code and Prepare a JavaScript Practice Folder is to recognize the mechanism under changed conditions, not to repeat the same successful path with different wording.

In Upgrade and cleanup strategy, look at VS Code and Prepare a JavaScript Practice Folder through the constraint that matters in this part of the lesson: make the relevant state visible before you change it, then compare the observed result with the contract you expected. In JavaScript, this prevents a local-looking edit from hiding an environment, data, permission, lifecycle or runtime assumption. Record the evidence from this step because the next decision in the Setup module should be based on what you measured rather than on a repeated rule of thumb.

Checkpoint before the next lesson

For the Checkpoint before the next lesson part of Install VS Code and Prepare a JavaScript Practice Folder, use a separate verification pass rather than repeating the earlier explanation. Focus on VS Code and Prepare a JavaScript Practice Folder under one changed condition and write down the before/after evidence. This is verification pass 2 for JavaScript lesson 3: the useful outcome is a concrete observation—output, state, diagnostic, generated artifact, query result or test result—that another learner can reproduce in the Setup workflow.

Now apply VS Code and Prepare a JavaScript Practice Folder to the current Checkpoint before the next lesson concern. Start from the smallest state that demonstrates the behavior, vary one input or configuration choice, and explain the result in terms of the JavaScript runtime or platform. If two outcomes look similar in the UI, use logs, return values, generated artifacts, query results, tests or another concrete signal to distinguish them.

A production-oriented walkthrough for VS Code and Prepare a JavaScript Practice Folder

1. Establish the VS Code and Prepare a JavaScript Practice Folder behavior

2. Inspect the VS Code and Prepare a JavaScript Practice Folder behavior

3. Implement the VS Code and Prepare a JavaScript Practice Folder behavior

A useful variation is to introduce one boundary case that is plausible for VS Code and Prepare a JavaScript Practice Folder: an empty value, a missing permission, an unexpected type, a repeated operation, an unavailable dependency, or a larger-than-normal input. The exact case depends on the technology, but the reasoning is the same—state the invariant you expect to remain true, then verify it explicitly. Keep this point tied to VS Code and Prepare a JavaScript Practice Folder. The same general engineering habit appears elsewhere, but the evidence and failure signals in this Setup lesson are specific to this mechanism.

4. Exercise the VS Code and Prepare a JavaScript Practice Folder behavior

5. Challenge the VS Code and Prepare a JavaScript Practice Folder behavior

Challenge this step in the context of build an interactive task dashboard while learning the language and platform APIs. Keep the change small enough that you can state the expected result before executing it. Capture the relevant input, configuration or code, then record the observable result. If the result differs from the prediction, do not add more changes yet; narrow the mismatch using diagnostics appropriate to a modern browser, DevTools, Node.js and an editor. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions.

A useful variation is to introduce one boundary case that is plausible for VS Code and Prepare a JavaScript Practice Folder: an empty value, a missing permission, an unexpected type, a repeated operation, an unavailable dependency, or a larger-than-normal input. The exact case depends on the technology, but the reasoning is the same—state the invariant you expect to remain true, then verify it explicitly. In this lesson's VS Code and Prepare a JavaScript Practice Folder example, record the evidence you observed rather than treating the rule as a slogan; that note becomes useful when the next Setup exercise changes the conditions.

6. Verify the VS Code and Prepare a JavaScript Practice Folder behavior

7. Harden the VS Code and Prepare a JavaScript Practice Folder behavior

A useful variation is to introduce one boundary case that is plausible for VS Code and Prepare a JavaScript Practice Folder: an empty value, a missing permission, an unexpected type, a repeated operation, an unavailable dependency, or a larger-than-normal input. The exact case depends on the technology, but the reasoning is the same—state the invariant you expect to remain true, then verify it explicitly. For VS Code and Prepare a JavaScript Practice Folder, apply this check in the context of the Setup workflow before carrying the assumption into later JavaScript work.

8. Document the VS Code and Prepare a JavaScript Practice Folder behavior

Where VS Code and Prepare a JavaScript Practice Folder implementations commonly go wrong

Treating VS Code and Prepare a JavaScript Practice Folder as syntax instead of behavior

If you can reproduce the syntax but cannot predict the state after it runs, the lesson is not finished. Rewrite the example in your own words and name the input, operation and observable result.

Copying a configuration from a different version

JavaScript tooling evolves. Compare the documentation version, runtime/tool version and project settings before assuming that a screenshot or command from another environment applies unchanged.

Verifying only the happy path

A successful first run proves one path. Add at least one negative or boundary case relevant to VS Code and Prepare a JavaScript Practice Folder. The failure should be intentional and the diagnostic should make sense.

Hiding the important state behind too much abstraction

Abstraction is useful after the behavior is understood. During the first implementation of VS Code and Prepare a JavaScript Practice Folder, keep the decisive state and control flow visible enough to debug.

Diagnosing VS Code and Prepare a JavaScript Practice Folder systematically

Use this order when VS Code and Prepare a JavaScript Practice Folder does not behave as expected:

1. Reproduce the smallest failing case.
2. Confirm the actual version/toolchain/environment.
3. Capture the first meaningful diagnostic or unexpected value.
4. Verify identity, permissions and configuration if the operation crosses a service boundary.
5. Inspect intermediate state rather than only the final UI.
6. Change one variable and rerun.
7. Compare the corrected behavior with a negative case.
8. Record the final cause so the same failure is faster to diagnose next time.

Your turn: prove the behavior

Extend the worked scenario so that VS Code and Prepare a JavaScript Practice Folder must handle one additional real constraint. Choose one: a second data shape, a failed dependency, an invalid input, a permission difference, a repeat operation, or a larger workload. Before implementing the change, write down the behavior you expect and the evidence that will prove it.

Your result is complete when another learner can reproduce the change from your notes, observe the expected behavior, and intentionally trigger at least one documented failure without damaging their environment. The specific test here is about VS Code and Prepare a JavaScript Practice Folder: change one relevant input, configuration value or boundary and make sure the result still matches the contract described above.

Review questions for VS Code and Prepare a JavaScript Practice Folder

• Can you define VS Code and Prepare a JavaScript Practice Folder without using the exact wording of an API/reference page?
• Can you identify the boundary where VS Code and Prepare a JavaScript Practice Folder begins and where another concept takes over?
• Can you predict the result of the worked example before running it?
• Can you explain one failure from evidence rather than guessing?
• Can you name one production constraint that the beginner example intentionally simplifies?
• Can you repeat the example from a clean state?

What matters after the syntax fades

• VS Code and Prepare a JavaScript Practice Folder is useful because it controls observable behavior, not because it adds another piece of syntax to memorize.
• Verification belongs in the workflow: build/check, run/reproduce, inspect, challenge, and repeat.
• The Setup module uses this lesson as a foundation for the next decisions in the JavaScript learning path.
• Official documentation is the source of truth for version-specific contracts; tutorials should teach you how to read and apply those contracts.

Source material for version-specific details

The following primary documentation was used as a factual reference map for this lesson. ScrutnLearn's explanation is original synthesis rather than copied documentation prose.

• MDN JavaScript Guide
• MDN JavaScript reference
• ECMAScript specification
• MDN Web APIs
• Node.js API documentation